The Umbrella Corporation is a fictional bioengineering pharmaceutical company appearing in the Resident Evil series of survival horror games by Capcom and in its film adaptions. In this Adobe Photoshop tutorial we will create Umbrella Corporation logo.
For the beginning create a new file (File>New) of 1280×1024 px and 72 dpi. Using the Paint Bucket Tool (G), fill the new layer with black color.

Next we’ll represent a kind of geometrical figure, like the next one, applying the Pen Tool (P).

Make several copies of the last made element, placing the copies the way you may see below. The copies may be done, pressing the combination of buttons (Ctrl+J). The turning over and the elements’ corrections may be done with (Ctrl+T).

Changing the color of four figures, we’ll get an umbrella.

Set the next shown parameters for each element, making a mouse click on the layer in layers’ palette (Blending Options>Inner Glow).

Choose the next Pattern Overlay now:

Blending Options>Stroke

You should get the next result:

Change the Blending Options>Stroke parameter on the white color on four next shown figures:

Create a new layer and fill it with black color. Select also Filter>Render>Clouds

Select now Filter> Sharpen>Unsharp Mask and set the next demonstrated parameters:

It’s the result you should get on this stage:

Set the next Blending mode - Soft Light

Try to get the same thing:

Create a new layer on which we’ll paint once again the red figures, getting a more intensive color:

Change the Blending Mode with those from below:

It’s the result we’ve got:

Now we should write the text we want to have on the wallpapers:

Choose the next demands, demonstrated below:


The final result is this one!Its a duplicate logo

Read More...»

Step 1 – Creating the Background

Choosing colors for a background is important because it will influence how your image stands out. Since we are going to be creating a vibrant glossy box, let’s use a dark background. Create a new document, mine is 256x256px for the purpose of this tutorial. Set a dark gray, #363636, as your foreground color and black, #000000, as your background color.
Once you have your colors selected, grab your Gradient Tool and create a radial gradient near the center of your document as shown in the image below.

Since we want the box to appear as though it is on a surface and not floating in the air, we are going to add another gradient. On a new layer, make a selection about 90px tall from the bottom of your document (depends on the size of your document). Create a radial gradient closer to the left side and towards the top of the selection so that it looks like the one in the image below.

Step 2 – Creating the Box

Now that we have our background, we need to create our actual box. To begin, simply create a selection about 100x100px and fill it with a nice blue color, such as #0062b3.
Since we want our box to have some perspective, we are going to need to transform it by going to Edit > Transform > Perspective. Bring the top right and bottom right corners of the box towards the center of the side a small amount and complete your transformation.
Then go to Edit > Free Transform and drag the right side to the left a small amount, to compensate for the perspective that you applied. You want your box to look like a square, keeping in mind how perspective affects the way your eyes see an object.
Now that we have the right shape, let’s change the color. Grab your linear gradient tool and create a light blue (#0080c3) to dark blue (#004893) gradient from the bottom left to the top right of the box.

With the right side of the box complete, lets move on to the left side. Create a duplicate (Right click layer > Duplicate) of the right side of your box and flip it horizontally (Edit > Transform > Flip Horizontal).
Then simply apply another perspective transformation (Edit > Transform > Perspective) of greater value, and drag the left side in even more. This will give the illusion that the left side of the box is viewable, but it is not the main side of the box. Depending on your tastes, you may want to create a new linear gradient for the left side to make it look a little more unique.
Notice that my box is near the center of the gradient for the surface we created. It also is low enough so that it appears that the entire bottom of the box is touching the surface. It is coming along great!

Step 3 – Creating the Gloss Effect

We have a great looking box already, but the style we are going for is glossy. We are going to accomplish this using a few different steps which can be difficult sometimes, so take your time here.
Lets start by applying a layer style effect called Satin to both of our box layers. this is going to give the box a neat effect that looks great underneath the gloss. It will also make the edges a little brighter than the center of the box, which matches the effect that I wanted.


On a new layer, make a selection of your right box layer by Ctrl+Clicking on the thumbnail for the layer. Grab your linear gradient tool and change it to Foreground to Transparent, with white (#FFFFFF) as your foreground. Create a gradient from the bottom left to the top right of the selection. Once the gradient is created, lower the Opacity of the layer to around 20%.

Now grab your Polygonal Lasso Tool and select part of the bottom of the gradient and delete it.

Repeat the process for the left box, making sure that the area of the gradient that you delete fits with the perspective of the box. I also lowered the opacity of the left gloss to around 10% or 15%.

Step 4 – Placing the Type

Choose a font type that you would like to use for your text, I chose Myriad Pro set to Bold and 60pt size.
Now, I want the text to fit along the same perspective of the box, but Photoshop doesn’t allow perspectives to be placed on text. To get around this, right click the text layer and go to Rasterize Type. This will change the text layer into a normal object layer. Now I can apply a perspective to it, and I will do the same things I did for the right box, bring the top right and bottom right sides in and move the right side to the left a little.

Then apply the following layer styles:

Gradient Overlay

#CCCCCC to #FFFFFF

Stroke

I’m going to place some extra text around my image and use Gradient Overlay effects to give them a unique look.

Step 5 – Creating the Reflection

Our image looks pretty good at this point and we could stop if we wanted to. However, this isn’t the effect I was going for. I really want my image to stand out with vibrant glows and colors, so let’s keep adding some effects.
Drag both of your box layers and both of the gloss layers into a new group (Layer > New > Group). Then duplicate that group (Right click layer > Duplicate). Go to Edit > Transform > Flip Vertical to flip the new layer group upside down.

Now we need to make the sides of the reflection touch the sides of the box, so shift+click the right box layer and the right gloss layer inside of your reflection group. Go to Edit > Transform > Skew and drag the right side of the layers up until they meet with the bottom of the box. Do the same for the left side of the box. Then lower the opacity of the group to around 50%.

Step 6 – Making the Box Glow

As of now, our box just looks like a blue colored box sitting on a reflective surface. I want to give the appearance that the box is glowing, so that it increases the dramatic look of the image.
Go back down to your table layer and make a new layer above it. Ctrl+click the thumbnail for your table layer to make a selection of it. Now grab a large soft brush, mine is around 300px, with a color to match your box, #196dad. Make a single brush mark that centers around your box.

Now create a layer underneath the table and make another brush mark to go over the background. Lower the opacity of the layer to around 50%.

Step 7 – Creating the Sky Lights

I’ve almost got the results I set out for. The box immediately grabs attention and has a nice glow to it, but it isn’t as vibrant as I want it to be. Adding some sky lights should help.
Create a new layer underneath your box group. Make a selection of the right box, and move the selection up about 30-50px. Make a white to transparent gradient in your selection and lower the opacity of the layer to 50%. Then apply a new gradient overlay:

Repeat the same process for the left box.

Finally, on a new layer, use a 5px brush with a nice light color, such as #54e0ff, and brush at the three viewable corners. Then use a larger soft brush, such as a 30px brush, and erase the tips to make them look more like sky lights.
Its a duplicate Artical

Read More...»

Draw 3D Crystal Icon in Photoshop

Step 1 – Drawing Path: Create a document of size 750×550 pixels.. Select the Custom Shape tool and choose the preset, Male Symbol. Draw a path like the one shown in the diagram.     Step 2 – Forming Top Surface: Create a new layer and name it as Top Surface. Go to the Paths tab and select the Work Path you have just created. Click on Load Path as Selection button. Back to Layers tab, fill the selection with #497923 on Top Surface layer.     Step 3a – Forming the Body: Hide Top Surface layer and create a new layer below Top Surface and name it as Body. Repeat Step 2 but fill the selection with #4AC1FF this time. Set the opacity of Body layer to 50%.     Step 3b – Forming the Body: Here is the tricky part. Select the Body layer, press Ctrl+A to select all. Select the Move tool and then press Ctrl+Alt+T. Press the Down arrow once (to shift the transformation downwards by 1px) and hit Enter. Press Ctrl+Alt+Shift+T to repeat the transformation. Keep doing so until you get the body thickness you want.     Step 4 – Adding Top Surface: Unhide the Top Surface layer and change its Blend Mode to Overlay and Opacity to 50%. Right-click on the layer and choose Blending Options. Select Outer Glow, set the Blend Mode to Lighten, color to #FFFFFF, Opacity to 100%, Size to 5px and leave the rest as default settings.     Step 5 – Adding a Base: Create a new layer and name it as Base. Rearrange this layer to be under Top Surface and Body. Repeat Step 2 but fill the selection with #00F5FF. Adjust the position of the base so it looks the same as the one of the left.     Step 6 – Adding Shadow:. Duplicate the Base layer and rename the new one as Shadow. Rearrange the Shadow layer to be under Base. Select Shadow layer, go to Filter > Blur > Gaussian Blur. Set the radius to 10 px.     Step 7a – Adding Gloss Effect: Create a new layer above the rest and name it as Gloss. Make a large circular selection with the Elliptical Marquee Tool. Select Brush tool, and pick the Airbrush Soft Round 300px. Paint across, slightly outside, at the bottom of the circular selection. Set the Opacity of this layer to 60%.     Step 7b – Adding Gloss Effect: Repeat the same thing to the tip of the arrow.     Step 7c – Adding Gloss Effect: Create a new layer and name it as Reflection. Draw 2 white bars as shown. Erase those parts that are outside of the body. Set the Opacity of this layer to 30%.     Step 7d – Adding Gloss Effect: Repeat Step 7c to the inner side of the body.

Its a duplicate Artical

Read More...»